Bush BSC90DFB, Manual

Page: 39 / 48

Care and maintenance
Looking after your appliance
Care and maintenance
39
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 257 7271.
Removal of Oven Door
To remove the oven door;
1. Open the oven door ( Fig 28 ).
Fig 28.
2.
Open the saddle bracket (with aid of screwdriver,
tongs etc.) up to end position (
Fig 29 ).
Fig 29.
3.
Close the door till it almost reaches the full closed
position as shown in
Fig 30 and remove the door
by pulling it towards yourself.
Fig 30.
Note : To re-assemble the door follow the opposite
rules of removal.
Please pay attention that the recessed forms should
be positioned properly on the hinge counterparts as
shown on
Fig 29
.
Maintenance
Changing the Oven Lamp
The product should first be switched off from the
electricity supply and cool (not been used recently).
1. Remove the glass lens, and then the bulb itself.
2. Place new bulb into the socket (resistant to 300
(degrees) 230V, 25 Watt, Type E14).
3.
Put the lens back into place. Your oven is now
ready for use again.
This product is designed for cooking only and should
not be used for room illumination.
Fig 31.
Fig 1.