Bush BSC90DFB, Manual

Page: 30 / 48

Functions
Simple everyday use
Functions 30
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
A cooking period between the time range of 0 and 10
hours can be set.
Fig 20.
Second; keep pressing on the MODE button until
you see “end” on the timer screen. When you see
“end” on the timer screen, the symbol (A) and
the
day’s time will begin to flash, with the addition of the
cooking period. Adjust the finishing time for the food
by using the (+) and (-) keys while the timer is in this
position. Some time after the adjustment operation is
completed, the day’s time will appear on the screen
and the symbol (A) will begin to continuously light on
the screen.
You can set a time which can be up 23.59 hours after
the time obtained by adding the cooking periot the
day’s time.
Fig 21.
The oven will start operating at the time calculated by
deducting the cooking period from the set finishing
time, and will stop at the set finishing time. The timer
will give an audible warning and the symbol (A) will
begin to flash. After bringing the oven button and oven
thermostat button to 0 position, pressing any button of
the timer will end the audible warning. Also, the time
will be brought to manual use function.
Sound Adjustment
While the timer shows the time of day; if the (-) button
on is kept pressed for 1-2 sec., it will give an audible
signal beep. After that each time the (-) button is
pressed, it will give three different types of signal beep.
Do not press any further buttons and it will save the last
selected signal type.