7
Simultaneous operation of and buttons
The corresponding heater must be chosen with
the Active/Deactive Heater Button , the
Decimal Point of the related Heater Display
flashes. To turn off the heater, and must
be pressed at the same time. A buzzer signal
sounds and ´0` appears in the heat setting
display.
If the timer is active for the selected heater, then
´0` will appear in the heater display and also the
related timer Cooking Zone Indicator Timer
Function and the Timer Display is turned off.
Reduction of the heat setting to ´0` by operating
button
The heater can also be turned off by reducing the
operated heat setting to ´0`.
When Heater Display indicates ´0`, an associated
Decimal Point of the heater will also be turned off.
Turning off an active heater, not only the ´0`
appears in the Heater Display, but also the
related timer Cooking Zone Indicator and the
Timer Display is turned off.
If there is any residual heat remaining in any
heater, this will be indicated in the display of the
corresponding heater with the letter 'H'.
If there is any residual heat remaining in any
heater, this will be indicated in the display of the
corresponding heater with the letter 'H'.
+
Key Lock
The Key Lock functionality is to to prevent touch
buttons from being pressed during operation.
It is
only possible to switch the appliance off.
The lock function is active, if the Key Lock
Button is pressed at least 2 sec. This
operation is acknowledged by a buzzer. After
successful operation of more than 2 sec, the Key
Lock Indicator flashes and the heater is locked.
The heater can only be locked in Operating Mode
(B-Mode).
If the heater is locked, only can be operated,
all other buttons are blocked. If there is any other
button operated in the blocked mode, the buzzer
and the Key Lock Indicator
But if you switched off the appliance, you can not
restart it again without unlocking.
Now, the hob control is unlocked and
can be operated
The child lock functionality will lock the appliance
in a complicated Multi-Step process.
Child locking and unlocking is only available in the
S-Mode.
First has to be pressed until the buzzer beeps,
then the and have to be pressed for at least
0,5 sec, but max 1 sec. simultaneously. Following
that, the appliance can be locked by touching
the . All 4 heater displays ´L`
After pressing until the beep, then
the and have to be pressed simultaneously
for at least 0,5 sec, followed by touching only the
. As a confirmation for successful unlocking,
´L` symbol in the displays will be erased
immediately.
will sound
will flash. It
is only possible to switch off the appliance.
To unlock the appliance, press and hold the
for 2 seconds. The Key Lock Indicator will now
disappear.
normally.
to confirm they
are locked.
The child lock is deactivated the same was it is
activated.
Child Lock
U
S
A
G
E
Customer Helpline
0345 257 7271
