Bush 5539284 BSOFTC, Instruction Manual

Page: 12 / 28

12
Installing your Built-In Single Oven
Bringing it all together
Installing your Built-In Single Oven
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 01759 487838.
Connections
Electrical
• IMPORTANT: Electrical connections must
be carried out by a suitably qualified
person and in accordance with all
relevant local building and installation
regulations.
1. See the rating label at the rear of the product for the
appliance’s load rating.
2. The oven must be connected to a dedicated circuit
suitably rated for the load of the appliance (see rating
label at rear of appliance) it must be connected via
a suitably rated cable to a double pole isolator oven
switch also suitably rated for the appliance.
3. The electrical cable should not touch the hot
parts of the appliance.
The electrical cable (not supplied) should not be
routed through any area that may be affected by
heat from the oven, especially the area directly
behind the oven.
The Connection diagram can be found on
the rear of the appliance
In the event of a power failure please reset the
timer. This oven will not operate until the timer is
properly set
This appliance must be installed by a suitably
qualified installer
! Failure to do this
will invalidate your warranty