Bush 5539284 BSOFTC, Instruction Manual

Page: 15 / 28

15
Using your Built-In Single Oven
Getting the most from your appliance
Using your Built-In Single Oven
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 01759 487838
Adjusting the time of day:
Touch and hold both and buttons until
time of day digits start flashing. Using or
keys, set the correct time. Wait for 7 seconds,
flashing will stop, adjustment is completed.
Selecting a cooking function:
Using either of or keys, you may scroll
through the function menu.
The current function will flash on the Function
Display for 7 seconds and the default cooking
temperature assigned to this function will
appear on the temperature display (Note: For
some functions, a temperature control is not
possible and the temperature display is blank).
The is steady on the status display, and
is flashing, indicating that you are ready
to cook but not started yet. Now check the
cooking temperature
Changing the default temperature:
The Temperature Setting on the Temperature
Display can be changed by touching the
button- the Temperature Display starts
flashing- and setting the desired value using
or in 5 degree intervals.
(!) Note: If you want to replace the default
temperature setting for this function with
this adjusted temperature permanently,
touch for approximately 5 seconds,
until a buzzer tone is heard. The factory set
default temperature for this function is now
permanently changed
Start manual cooking:
Once a function is selected, touching the
key, initiates cooking at the temperature
setting on the temperature display (if any).
disappears , and the cooking time passed is
displayed on the timer/meat probe display.
Cooking will continue until it is either ended
by the user manually (see: to pause,edit
or end cooking) or the maximum allowed
cooking time, depending on the selected
cooking temperature, has passed, as listed
below:
050-120 C 10h
121-200 C 6h
201-250 C 3h
To pause edit or end cooking:
Touching during cooking, interrupts the
cooking progress and starts flashing,
whereas other portions of the display remain
the same. All oven heating elements and
turbo fan are turned off temporarily. Cooking
is paused.
To end cooking, touch
once again, all
cooking related indications on the display
disappear. The temperature display will
indicate the residual heat ,if any ( see: Residual
Heat Indication ).
Note: After cooking has ended, touching
brings the previous function and temperature
settings on the screen, touching
a second
time will restart cooking