Bush 5539284 BSOFTC, Instruction Manual

Page: 17 / 28

17
Auto end of cooking:
After cooking ends automatically, the
temperature display will indicate the residual
heat ,if any (see: Residual Heat Indication ),
will be flashing and buzzer will sound
for 7 minutes. Touching will cancel the
buzzer.
Residual Heat Indication:
After cooking has ended manually or
automatically, if the internal oven temperature
is above 60 °C, ‘down arrow’ on the right
side of heat bars flashes every 2 seconds also
“hot”
is displayed on the temperature display.
Each one of the 5 heat bars symbolizes an
amount over 60 °C. This indication goes on
until the oven temperature falls below 60 °C.
Special Features:
Lamp ON/OFF: The lamp inside the oven will
be ON, whenever a function is being selected
or is being adjusted. It will turn OFF, after
cooking has finished and the residual heat
indication ends. However, it can be switched
ON or OFF by touching , except when
using the defrost function.
Heat Up Rapidly:
Sometimes it is desired to bring the oven
temperature rapidly to the adjusted value.
Touching will energize the circular element
and/or turbo fan temporarily to achieve a
rapid heat up. The symbol will be visible on
the screen, after reaching the adjusted oven
temperature, it will vanish and a buzzer tone is
heard.
Note: Rapid heat up is not allowed for
some functions (grill) or when the actual
temperature is less than 50C away from the
adjusted one or the adjusted temperature is
below 100 C.
Child Lock:
Child lock can be activated or deactivated
via touching the
key for 1 second, until
the symbol appears on the screen. When
child lock is activated, no key except , is
accepted.
Minute Minder Alarm:
Touch and release key until appears
flashing. Set the time in minutes, using the
or keys. Flashing will stop after 7 seconds, a
buzzer alarm lasting 7 minutes will sound after
the set time has elapsed. This alarm can be
stopped by touching either the or keys.
Alarm Clock:
Touch and release key until appears
flashing. Set the alarm time , using the or
keys. Flashing will stop after 7 seconds,
a buzzer alarm will be produced when the
adjusted time has come. This alarm can be
stopped by touching either the or keys.
ERROR INDICATIONS:
When a situation occurs that prevents normal
operation, the oven enters “error mode.” The
oven is in the standby status and an error
code is displayed on the Time of Day Display.
Even if the error recovers, this code will
remain on the display until
key is touched.
A total number of 8 error codes exist:
Err1: Communication error
Err2: PT1000 open circuit
Err3: PT1000 short circuit
Err4: Temperature exceeded in user interface
Err5: Temperature exceeded in the power
module.
Err6: Temperature sensor failure in the user
interface.
Err7: Temperature sensor failure in the power
module.
Err8: Main power error. There is no warm up
detected although heating elements seem to
be activated.