Bush 5539284 BSOFTC, Instruction Manual

Page: 20 / 28

20
Care and maintenance
Looking after your appliance
Care and maintenance
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Cleaning
WARNING! Isolate the power supply to the oven and
make sure that the oven is cool.
Do not clean using caustic creams, abrasive
cleaning powders, thick wire wool or hard
tools. Enamelled parts of the oven can be
damaged if excess cleaning liquids are not
immediately removed.
After cleaning the interior parts of the oven
with a soapy cloth, rinse it and then dry
thoroughly with a soft cloth.
Clean the glass surfaces with special glass
cleaning agents.
Never use flammable agents like acid, thinner
or petrol when cleaning your oven.
Do not clean your oven with a steam cleaner.
Do not wash any part of your oven in a
dishwasher.
Changing the oven lamp:
Oven door seal:
Please check the oven door seal at regular
intervals. If the seal requires cleaning, clean
it without using abrasive materials
If the door seal is damaged contact your
authorised service agent on 01759 487838
Do not use the oven until the door seal has
been repaired or replaced
Enamelled Parts:
In order to keep them as new, it is necessary
to clean them frequently with mild warm
soapy water and then dry with a cloth. Do not
wash them while hot and never use abrasive
powders or abrasive cleaning materials. Do
not leave anything spilled onto enamelled
parts for long periods of time.
Stainless Steel:
Stainless steel parts must be cleaned
frequently with mildly warm soapy water and
a soft sponge and then dried with a soft cloth.
Do not use abrasive powders or abrasive
cleaning materials. Do not leave anything
spilled onto stainless steel parts for long
periods of time.
1. Pull the plug out of socket.
2. Turn the lamp fixing glass counter-
clockwise direction to separate it
or the
glass lamb cover over the screwdriver
is removed (A).
3. To seperate lamp from body turn it to
counter-clockwise direction.
4. Fix new lamp that you gain from
authorised service in place of old lamp.
5. Ensure the appliance is switched off
before replacing the lamp to avoid the
possibility of electric shock.
Bulb Type: 25W E screwed