manualshive.com logo in svg

Bush Hog RMB 1445, Operator'S Manual, Page: 96 / 114

Share
Download
Bush Hog RMB 1445 Operator'S Manual Download Page 96

OPERATION

RMB 1445   11/10

Operation Section 4-42

© 2010 Alamo Group Inc.

OPERA

T

ION

Reduce speed before turning or applying the brakes.
Ensure that both brake pedals are locked together
when operating on public roads.

   OPS-U- 0023

When transporting Boom Mower on a truck or trailer, the height or width
may exceed legal limits when the boom is in the transport position.

Contact with side or overhead structures or power lines can cause

property damage or serious injury or death. If necessary lower boom to
reduce height and/or remove mowing head to reduce width to the legal
limits. 

(SBM-8)

13.2  Hauling the Tractor and Implement

Before transporting a loaded tractor and implement,
measure the height and width dimensions and gross
weight of the complete loaded unit.  Ensure that the
load will be in compliance with the legal limits set for
the areas that will be traveled through. 

OPS-U- 0024

 

Summary of Contents for RMB 1445



















































































































Reviews:

No comments