Bush Hog HT210, Operator'S Manual

Page: 30 / 62

ASSEMBLY
HT210
06/17
Assembly Section 3-4
© 2016 Alamo Group Inc.
A
SSE
MB
LY
STEP “A”
Attach PTO Shield q to the Gearbox w
using two M8 Nuts e .
Item Description Quanity
1 PTO Shield 1
2 Gearbox 1
3 Nuts M8 2
STEP “B”
Attach the Drawbar q to the machine body
w with pin e into the holes r of the machine
body w and drawbar q . Place a bushing t
on each side of the pin, align holes and
install the two M5 x 40 split pins
y through
bushing and pin.
Item Description Quanity
1 Drawbar 1
2 Machine Body 1
3 Pin 1
4 Hole for Pin 2
5 Bushing 20.5/30 x 12 2
6 Split Pin m5 x 40 2
STEP “C”
Install Grease Nipple q to the pin and fork of
the Crank Assembly w . Insert the pin of the
Crank Assembly into the seat e on the
Drawbar placing a spacer r between the pin
and seat.
Install a spacer
r to the pin and install the
split pin t through the pin.
Attach the Fork of the Crank Assembly w at
holes y using pin u and split pins t .
Item Description Quanity
1 Grease Nipple M6 3
2 Crank Assembly 1
3 Seat 1
4 Shim M30.5 x 39.8 x 1
5 Split Pin M5 x 40 3
6 Mouting Hole 1
7 Pin m20 x 66 1