BUSCH SECO DC 0063-0100 B/C, Instruction Manual

Page: 9 / 20

u Make sure that the vacuum pump is shut down and cannot be
accidentally switched on again
u Remove the fan cover of the drive motor
u Slowly rotate the fan by hand in the intended direction of
rotation
u Refit the fan cover of the drive motor
If it is suspected that deposits could have gathered in the vacuum
pump:
u Clean using dry compressed air
l Observe the chapter “Installation and Commissioning”
Dismantling and Disposal
l Make sure that all materials and components to be treated as spe-
cial waste have been separated from the vacuum pump
According to the best knowledge at the time of print of this manual,
the materials used for the manufacture of the vacuum pump involve no
risk.
l Dispose of special waste in compliance with applicable regulations
l Dispose of the vacuum pump as scrap metal
Removal from Service
Page 9