BUSCH Mink MM 1202 AP, Instruction Manual

Page: 16 / 24

9 | Decommissioning
16 / 24 0870135611_MM1202_MM1322AP_A0001_IM_en_MD
Busch will only accept machines that come with a completely filled in and legally bind-
ing signed ‘Declaration of Contamination’ (form downloadable from
www.buschvacuum.com ).
9 Decommissioning
• Shut down the machine and lock against inadvertent start up.
• Vent the connected lines to atmospheric pressure.
• Disconnect all connections.
If the machine is going to be stored:
• See Storage [ ► 6] .
9.1 Dismantling and Disposal
• Drain the oil.
• Separate special waste from the machine.
• Dispose of special waste in compliance with applicable regulations.
• Dispose of the machine as scrap metal.
10 Spare Parts
NOTICE
Use of non-Busch genuine spare parts.
Risk of premature failure!
Loss of efficiency!
• The exclusive use of Busch genuine spare parts and consumables is recommended
for the correct functioning of the machine and to validate the warranty.
Spare part Description Part no.
Oil fill plug (=Venting
valve) Includes appropriate seal ring 0543 107 407
Oil sight glass 0583 000 001
Seal ring For oil sight glass 0480 000 271
Oil drain plug Includes appropriate seal ring 0415 134 870
Seal ring For oil drain plug 0482 137 352
Inlet flange lower part Includes non-return valve 0916 000 670
Inlet screen 0534 000 041
Safety valve Quote in your order also the ultimate
working pressure of the machine On request
If other parts are required:
• Contact your Busch representative for the detailed spare parts list.