Burstner Trecento 2011, Owner'S Manual

Page: 98 / 208

98
Belcanto/Trecento - 10/11 - Ausgabe 07/10 - 1976844 - BUE-0042-06EN
Appliances
9
When the heater is turned on, it starts with the last set operating mode.
Switching on the heater:

Press " " button. The Start screen appears in the display. The heater
starts automatically.
Switching the heater off:

Press " " button. The heater is turned off.
9.2.7 Ultraheat additional electric heater (special equipment)
The Ultraheat additional electric heater is built-in to the hot-air heater. There-
fore there are three heating options:

Only the hot-air heater

Hot-air heater and electric heater

Only the electric heater
The vehicle can be heated more quickly with the additional electric heater.
Switching on:

Connect the vehicle to the 230 V power supply (see section 8.6).

Turn the rotary switch (Fig. 115,1) to the desired output level (500, 1000 or
2000 W).

Turn temperature control knob (Fig. 115,3) to the desired output level.
Switching off:

Turn the rotary switch (Fig. 115,1) to " " (Fig. 115,2).

If gas and 230 V electrical operation is selected and if the vehicle is con-
nected to the 230 V power supply, then the hot-water heater at first only
operates in 230 V electric operation. Only if the heat output is insufficient
does the gas operation also automatically switch on.

The gas operation is only possible when the regulator tap on the gas bottle
and the gas isolator tap are opened.

230 V electrical operation is only possible when the vehicle is connected to
the 230 V power supply.

The additional electric heater only operates if the vehicle is connected to
the 230 V power supply.

If the heater is operated by electricity and gas simultaneously, the addi-
tional electric heater switches off to prevent possible overheating by the
stronger gas burner.
Fig. 115 Operating unit for Ultraheat
additional electric heater
1 Rotary switch
2 Off
3 Temperature control knob