Burstner Trecento 2011 Owner'S Manual Download | Manualshive

Page: 166 / 208

background image

166

Belcanto/Trecento - 10/11 - Ausgabe 07/10 - 1976844 - BUE-0042-06EN

Wheels and tyres

13

13.5.2

Tightening torque

13.5.3

Changing a wheel



No persons may be in the vehicle while it is is raised.



Whilst the vehicle is in a jacked up position, persons must not lie down
under it.



Do not damage the thread of the thread bolts when changing the wheel.



Tighten the wheel nuts or wheel bolts cross-wise (Fig. 207).



When changing wheels (e.g. alloy wheel rims or wheels with winter tyres),
use the correct wheel bolts of the correct length and shape. The firm
seating of the wheels and the function of the braking system depend on
this.



Wheel rims and tyres not permitted for use with the vehicle can jeopardize
road safety.



Protect the vehicle according to the national regulations, e.g. with a hazard
warning triangle.



Before changing the wheel, check the wheel rim and tyre size, the max. tyre
load and the speed index on the tyres. Only use the wheel rim and tyre
sizes stated in the vehicle documents.



When alloy wheel rims are mounted, the wheel nuts or wheel bolts for the
spare wheel (steel wheel rim) are located in the drawer in the kitchen unit.

Fig. 208 Wheel bolts

1 Wheel bolt steel wheel rim

2 Wheel bolt alloy wheel rim

Wheel rim

Tightening torque

Steel wheel rim

90 Nm (67 ft/lbs)

Alloy wheel rim

120 Nm (89 ft/lbs)



The footplate of the vehicle jack must be levelly positioned on the
ground.



Do not tilt the vehicle jack.



Always insert the insertion profile of the AL-KO vehicle jack (special
equipment) into the retention pouch as far as possible.



If alloy wheel rims are mounted and a steel spare wheel is mounted after
a puncture: Do not drive any further than necessary (car dealer, car
workshop, tyre dealer). Only drive at a suitable speed. The different
wheels affect driving handling.

«
...
164
165
166
167
168
...
»

Summary of Contents for Trecento 2011

















































































































































































































Reviews:

No comments

Related manuals for Trecento 2011

Brand: Yamaha Pages: 94

Allegro Bus 2016

Brand: Tiffin Motorhomes Pages: 148

Ameri-Lite 2019

Brand: Gulfstream Coach Pages: 97

1983 Pathfinder

Brand: SportsCoach Pages: 40

Brand: Auto-Trail Pages: 63

Brand: Auto-Trail Pages: 66

Brand: Auto-Trail Pages: 69

ADVENTURE 55 2020

Brand: Auto-Trail Pages: 66

Brand: Auto-Trail Pages: 70

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands