Burstner Trecento 2011, Owner'S Manual

Page: 167 / 208

167
Belcanto/Trecento - 10/11 - Ausgabe 07/10 - 1976844 - BUE-0042-06EN
Wheels and tyres
13
Preparing the connected
caravan:

Loosen the stabilising device in caravan couplings with stabilising devices.
Otherwise the friction pads will be highly loaded.

Pull the handbrake of the towing vehicle and go to first gear or reverse
gear.
Preparing the disconnected
caravan:

Park the vehicle on as even and stable a surface as possible.

Apply the handbrake.

Place the support wheel diagonal to the direction of travel and secure with
suitable tools (Fig. 209).
Changing the wheel:

Place chocks or other appropriate objects beneath the opposite wheel of
the vehicle to secure it (Fig. 210).

Remove the spare wheel from the spare wheel support.

If the ground is soft, place a stable support such as a wooden board
beneath the vehicle jack.

Commercial vehicle jack:
Position the commercial scissor-type jack (Fig. 211) or hydraulic vehicle
jack on the frame or on the axle.

AL-KO vehicle jack:
Insert the insertion profile (Fig. 212,2) of the AL-KO vehicle jack into the
retention pouch (Fig. 212,1) as far as possible.

A special vehicle jack from AL-KO with holder pockets is available as spe-
cial equipment. These holder pockets are mounted on to the frame.

The AL-KO jack has a bearing capacity of 800 kg.

You should have a useable spare wheel available at all times. For this
reason the wheel you have replaced should be repaired immediately.

Take note of the general instructions in this chapter.
Fig. 209 Securing support wheel Fig. 210 Securing vehicle
Fig. 211 Commercial vehicle jack Fig. 212 AL-KO vehicle jack