manualshive.com logo in svg

Burstner Trecento 2011, Owner'S Manual

Looking for the Owner's Manual for your Burstner Trecento 2011? Look no further! At manualshive.com, you can easily download the manual you need for free. Get all the information you need to fully enjoy your Burstner Trecento 2011, hassle-free and at your fingertips!

Share
Download
background image

117

Belcanto/Trecento - 10/11 - Ausgabe 07/10 - 1976844 - BUE-0042-06EN

Appliances

9

Gas operation

Switching on:

Open the regulator tap on the gas bottle and the gas isolator tap "Refriger-
ator".

Press the on/off switch/energy selector switch (Fig. 137,1) down for 2 sec-
onds in order to switch on the appliance. The LED of the operating mode 
chosen most recently lights up.

If appropriate press the on/off switch/energy selector switch (Fig. 137,1) 
until the gas operating indicator "

" lights up. Gas supply is open. Ignition 

will take place automatically. A ticking sound can be heard until ignition has 
been completed successfully.

Use switch (Fig. 137,6) to adjust refrigerating temperature.

Switching off:

Press down the on/off switch/energy selector switch for 2 seconds. Refrig-
erator is switched off.

Close the gas isolator tap "Refrigerator" and the regulator tap on the gas 
bottle.

Electrical operation

Select only one energy source.

The refrigerator always requires a 12 V control voltage, regardless of which 
type of energy it is using. The control voltage is present as soon as the 
transformer/rectifier is switched on. Therefore the closed circuit current 
always flows even if the refrigerator is switched off. Always switch off the 
transformer/rectifier for a temporary lay-up.

Never let gas escape unburned due to danger of explosion.

Fig. 137 Operating controls for the refrigerator (Dometic 8 series with MES)

1

On/off switch/energy selector switch

2

Display-LED "open door" (only for central locking system of the refrigerator door)

3

Display-LED "fault"

4

Operating indicators

5

Display-LED "temperature range"

6

Switch for temperature setting

7

Door opener (only for refrigerator door central locking system)

Close the gas isolator tap "Refrigerator" when the refrigerator is operated 
electrically.

Summary of Contents for Trecento 2011

















































































































































































































Reviews:

No comments

Related manuals for Trecento 2011

GMC 1974 MotorHome Manual preview
1974 MotorHome
Brand: GMC Pages: 26
Swift Escape 664 Manual preview
Escape 664
Brand: Swift Pages: 15
Swift Kon-tiki Service Handbook preview
Kon-tiki
Brand: Swift Pages: 24
Swift 2002 MH Owner'S Service Handbook preview
2002 MH
Brand: Swift Pages: 22
Swift Bel-Air 750 Owner'S Service Handbook preview
Bel-Air 750
Brand: Swift Pages: 25
Swift 2005 MH Owner'S Handbook Manual preview
2005 MH
Brand: Swift Pages: 108
Swift Edge 412 Optional Technical Handbook preview
Edge 412 Optional
Brand: Swift Pages: 150
Swift Motorhomes 2013 Owner'S Service And Warranty Handbook preview
Motorhomes 2013
Brand: Swift Pages: 205
Born Free Freedom 2017 Owner'S Manual preview
Freedom 2017
Brand: Born Free Pages: 24

Brands by name

Popular brands

Load more brands