Model 4420-V001
DIGISTANT
®
Page 24
-
Switch on the device and connect it as shown above.
Selection of the thermocouple
-
Press the FCT and TC keys. The "TC selection" display appears.
-
Using the
→
or
←
key, select the desired thermocouple.
Selection of the reference junction
-
After that, press the
▲
or
▼
key and select "Measure:.....".
-
Then use the
→
or
←
key to select "Measure:RJ-MAN".
-
Acknowledge with ENT .
The following display appears:
-
You can now select the displayed temperature value with ENT , or enter the new reference
junction temperature, press the
UNIT
key and acknowledge the new value with ENT .
DIGISTANT
®
4420-V001
Eingang
Input
-
+
4.2.3.2 RJ-Man: Measurement after the reference junction;
the reference-junction temperature is constant and know
Thermoelectric
wires
reference junction
Copper wire
> S E T T I N G R J - M A N
R J :
