manualshive.com logo in svg

Burster DIGISTANT 4420-V001, Operation Manual, Page: 100 / 146

Share
Download
Burster DIGISTANT 4420-V001 Operation Manual Download Page 100

Model 4420-V001

DIGISTANT

®

Page 100

Parameters: 

Numerical value between 0 and 9999. This value is interpreted as 

the storage time in seconds.

REMARKS:

Enquiry form: 

DATalogger:TIME

Response: 

The currently set storage time in seconds.

Restrictions: 

Instruction not permissible if  - device in ramp mode,

- device in calibration mode,

- measurement in progress. 

DATalogger:BLOCk:MINimum?

DESCRIPTION: 

The minimum value of a stored data block is calculated and 

supplied.

SYNTAX: DATalogger:BLOCk:MINimum?<parameter>
Parameters: 

The block number as a numerical value.

REMARKS:

Enquiry form: 

Only enquiry form

Response: 

The calculated minimum value of the block. Numerical value with 

unit.

Restrictions: 

Instruction not permissible if  - device in ramp mode,

- device in calibration mode,

- measurement in progress.

DATalogger:BLOCk:MAXimum?

DESCRIPTION: 

The maximum value of a stored data block is calculated and supplied.

SYNTAX: DATalogger:BLOCk:MAXimum?<parameter>

Parameters: 

The block number as a numerical value.

REMARKS:

Enquiry form: 

Only enquiry form

Response: 

The calculated maximum value of the block. Numerical value with unit.

Restrictions: 

Instruction not permissible if 

- device in ramp mode,

- device in calibration mode,

- measurement in progress.

DATalogger:DATA:VALue?

DESCRIPTION: 

A value stored in the data logger is supplied.

SYNTAX: DATalogger:DATA:VALue?<parameter>

Parameters: 

The memory number as a numerical value.

REMARKS:
Enquiry form: 

Only enquiry form

Response: 

Memory number, block number, date, time, measurement value

Restrictions: 

Instruction not permissible if  - device in ramp mode,

- device in calibration mode,
- measurement in progress.

Summary of Contents for DIGISTANT 4420-V001



















































































































































Reviews:

No comments