8
Modes of Operation:
Saver Mode and Hi-Low Speed Switches
All Burromax electric bikes are set on Saver mode and the Hi-Low
speed Button should be in the Low position when they are shipped.
You should change this setting only when you feel the rider can
control the vehicle at higher speeds. The hi-low switch is located on
the throttle just below the multi-function gauge, (the red button)
and you will notice a
H
for High and a
L
Low on the Gauge to the
left of the speedometer portion of the gauge. Depress the button
and release to change between Hi and low speed settings.
You can change this setting while the bike is in motion.
High and Low Speed:
TT1600R has a top speed of 32 mph on the High setting and a top
speed of 21 mph on the low setting. You can change this setting
while the bike is in motion.
Saver Mode Settings:
To switch from Saver mode to Standard mode does not require the
removal of the side cover. There is a small hole in the battery side
cover allen bolts (fig 5 A) and with the key switch in the on position
you can insert a small tool and depress and release the switch and
notice a small
S
appear and disappear on the gauge.
S
is for saver and provides a mode of operation that consumes less
power when running on low or high. If you see nothing in this area
of the gauge you would be in the normal mode of operation.
Side Lighting
The side lighting is OFF when the bike is received.
We have incorporated LED lights on the sides of the bike for both
safety and utility. These lights can help you be seen in daytime and
nighttime running and are especially useful as a camping light. The
lights can be turned on or off by depressing the hidden switch using
a small tool as shown (fig 5 B)
Fig 5
