4
Installing the Front Wheel
Install the front axle into the left fork leg far enough to install the
first wheel spacer. Hold the front wheel up with the Brake rotor to
the brake caliper side of the front fork and insert the axle into the
wheel. Twist the axle back and forth to slide it through the bearings
and spacer in the wheel. Install the 2nd wheel spacer between the
fork and wheel on the opposite side. You may have to spread the
forks slightly to get the spacer in between the axle and fork. Slide
the axle all the way through the forks and install the axle nut.
Tighten Securely. Make sure the front wheel spins freely after you
have tightened the axle nut.
Installing the Front Brake Caliper
DO NOT Squeeze the brake levers until the brake has been fully
assembled to the front fork and brake rotor.
Remove the caliper mounting screws from the brake caliper or
caliper mount Bracket on the front fork. Remove the plastic spacer
located in between the caliper brake pads. Install the caliper over
the Brake Rotor, align the mounting holes and install the mounting
bolts (Fig 1) hand tight. Before tightening the mounting bolts
Loosen the caliper adjusting bolts (Fig 2)
½
turn so that the caliper
is loose on the mounting bracket. Once the caliper adjusting screws
are loose, you can now tighten the caliper mounting bolts.
Fig 1
Fig 2
