*High impact large front bumper and foam bumper.
*CNC machined steel transmission bevel gears.
*CNC machined aluminium front shock mount.
*CNC machined aluminium rear shock mount with heat sink.
*Low C. G. lay-down steering servo and throttle servo mount.
*Front and rear push rod suspension design.
*Threaded lay-down 13mm big bore shocks for front and rear.
*Adjustable ackerman steering geometry design.
*Graphite front plate.
*Graphite low centre of gravity radio tray.
*Front pivot ball suspension with dust boot covers.
*Rear pivot ball uprights for quick geometry changes.
*Spring steel universal joints for front and rear.
*Adjustable blade type sway bar for front and rear.
*Adjustable down-stop and up-stop suspension design.
*CNC machined 7075-T6 hard coated chassis brace.
Features:
*Quick release centre differential mount design.
*Convenient carry handle In the centre of the car.
*Changeable roll centre design for front and rear suspension.
*CNC machined steel brake discs.
*Special semi-metallic brake pads.
*Shoe type 2 speed transmission.
*CNC machined clutch bell with screw-on changeable gears.
*CNC machined 7075-T6 aluminium, milled out slim line chassis.
*Secure transponder mount.
*High flow air filter for maximum engine protection.
*Side body mounts and body protector.
*Rear air flow diffuser creates more down force.
*Exhaust deflector design to protect the inside of the body.
*Chrome exhaust pipe detail parts.
*High grip radial tires on 17mm hex wheels.
*Choice of different body designs.
THIS IS NOT A TOY !
ADDITIONAL PARTS NEEDED
INSTRUCTION MANUAL
*Radio System
*.21 - .28 Engine
* Batteries 8 AA for Radio
* Receiver Batteries (10202 Hump Pack)
* Model Fuel 20% Nitro
* Paint for Lexan Bodies
* CA Glue
This kit is extremely fast, and can easily
go over 40mph and can seriously injured
someone. If you are under 18years of age
have and adult supervision.
Summary of Contents for DM-ONE PRO TOURING X-SIZE NITRO SEDAN
Page 2: ...BLANK...
Page 29: ...BLANK...
