6
TT 250 Remove screw from front fork. Align the
number plate with the hole in the fork and tighten with
a screwdriver.
Inflating the Tires
Tires are inflated when shipped, but they invariably lose
some pressure between the point of manufacturing and
your purchase. Using a bicycle tire pump equipped for
a Schrader valve, inflate both tires to the PSI indicated
on the Tire Information Label on the rear fender or Tire
Sidewall
Assembly and Set-Up
Note:
The pressurized
air supplies found at
gasoline stations are
designed to inflate
high-volume automobile
tires. If you decide to use
such an air supply to
inflate your tires, first
make sure the pressure
gauge is working, then
use very short bursts to
inflate to the correct PSI.
If you inadvertently
over-inflate the tire,
release the excess
pressure immediately
.
