3
Remove contents from box. Remove the foam
separators that protect the components from damage
during shipping. Inspect the contents of the box for
scratches in the paint, dents or kinked cables that may
have occurred during shipping. Because these vehicles
are 95 percent assembled and packed at the factory,
there should not be any problems, even if the box has a
few scars or dents.
MAKE SURE POWER SWITCH IS TURNED “OFF”
BEFORE CONDUCTING ANY MAINTENANCE
PROCEDURES.
Burromax
recommends assembly by an adult.
Allow up to 30 minutes for assembly.
Allow up to 12 hours for initial charge (see page 4 for
charging information).
During assembly you can familiarize yourself with the
vehicles components and design.
Enjoy the process and take your time to insure the
components are safe and secure!
WARNING
:
DO NOT USE NON-Burromax
PRODUCTS WITH YOUR
Burromax Vehicles. These
Vehicles have been built to
certain Burromax design
specifications. The original
equipment supplied at the time
of sale was selected on the
basis of its compatibility with
the frame, fork and all other
parts. Certain aftermarket
products may or may not be
compatible and may void your
warranty
.
Required Tools
4mm and 5mm and
6mm Hex Key
wrenches (Included)
10mm,12mm 14mm
and 17mm
open
wrench (Included)
Screwdriver
(included)
Bicycle tire pump for Schrader
valves, with pressure gauge
(Not Included)
Before You Begin
Before You Begin
