
18
Troubleshooting Guide
Problem Possible Cause Solution
Motorbike does not run
Undercharged battery
Loose wires or connectors
Charge the battery. A new battery should
have been charged for at least 12 hours
before using the motorbike for the first time
and up to
8 hours after each subsequent
use.
Check all connectors. Make sure the
charger connector is tightly plugged into
the charging port, and that the charger is
plugged into the wall.
Make sure power
flow to the wall
outlet is on.
Check all wires and connectors
to make sure they are tight.
The fuse will burn out and automatically
shut off the power if the motor is
overloaded.
Burned-out fuse
Motor or electrical switch
damage
An excessive overload, such as too heavy a
rider or too steep a hill, could cause the
motor to overheat. Replace the fuse with a
new one of equal amperage. Correct the
conditions that caused the fuse to burn out
and avoid repeatedly burning out fuse.
Contact your local B u r r o M a x authorized
dealer for diagnosis and repair.
Motorbike was running
but suddenly stopped
Short run time (less
than 15 minutes per
charge)
Undercharged battery
Charge the battery. A new battery should
have been charged for at least 12 hours
before using the motorbike for the first
time and up to 8 hours after each
subsequent use.
Check all wires and connectors. Make
sure the battery connector is tightly
plugged into the charger connector, and
that the charger is plugged into the wall.