25
TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
periodically and adequately every 3 to 5
days. Ash accumulated in the combustion
chamber, condensed moisture and tar
deposits significantly reduce the life
span and performance of the boiler and
result in deterioration of the properties
of the heat exchange surface In case
of larger ash accumulation there is not
enough space for fuel combustion which
may result in damage of the boiler as a
whole. Regular cleaning is important to
ensure the optimal performance and long
operational life of the boiler.
It is recommended that the ash-and soot-
container be emptied and cleaned every 3
to 5 days depending on fuel used. Scrape
the inside of flue pipes if necessary. Use
the scraper tool.
Additional barrier ribs into combustion
chamber
ATTENTION! Disassemble barrier
ribs (1), (2) and pellet burner
before change boiler burning
mode to solid fuel.
Disassembling of barrier ribs:
4
1.
Open upper boiler door. Just behind
the boiler door are fitted upper and lower
protective doors. Disassemble upper
protective door
(1)
in this order:
- lift the door gently up and forward
- detach the door from retaining hinges
- remove gently upper protective door.
2.
Gently pull out lower barrier rib (2)
which is on top of middle water rib (3)
3.
Gently pull out upper barrier rib (4)
which is on top of upper water rib
4.
For assembling the barrier ribs back
into boiler follow the steps in reverse
order.
Scrape the inside of flue pipes if necessary.
Use the scraper tool.
It is mandatory to clean once a week
additional barrier ribs into combustion
chamber
Disassemble the barrier ribs.
Follow described above instructions for
assembly and disassembly.
Clean barrier ribs.
Clean the accumulated ash from heat
exchanging ribs
Caution! Ashes may contain
smoldering charcoal. Dispose
of ashes only in specially
designated facilities. Disposing
of ashes into public garbage
containers may cause fire.