Burnham V1104H, Installation, Operating And Service Instructions

Page: 2 / 80

2
IMPORTANT INFORMATION -
READ and save these instructions for reference
All boilers must be installed in accordance with National, State and Local Plumbing, Heating and Electrical Codes All boilers must be installed in accordance with National, State and Local Plumbing, Heating and Electrical Codes
and the regulations of the serving utilities. These Codes and Regulations may differ from this instruction manual.
and the regulations of the serving utilities. These Codes and Regulations may differ from this instruction manual.
Authorities having jurisdiction should be consulted before installations are made. In all cases, reference should be
Authorities having jurisdiction should be consulted before installations are made. In all cases, reference should be
made to the following Standards:
made to the following Standards:
USA BOILERS USA BOILERS
A. Current Edition of American National Standard ANSI/NFPA 31, “Installation of Oil Burning Equipment,” for A. Current Edition of American National Standard ANSI/NFPA 31, “Installation of Oil Burning Equipment,” for
recommended installation practices. recommended installation practices.
B. Current Edition of National Fuel Gas Code, NFPA 54/ANSI Z223.1. B. Current Edition of National Fuel Gas Code, NFPA 54/ANSI Z223.1.
C. Current Edition of American National Standard ANSI/NFPA 211, “Chimneys, Fireplaces, Vents, and Solid
C. Current Edition of American National Standard ANSI/NFPA 211, “Chimneys, Fireplaces, Vents, and Solid
Fuel Burning Appliances,” For Venting requirements. Fuel Burning Appliances,” For Venting requirements.
D. Current Edition of American Society of Mechanical Engineers ASME CSD-1, “Controls and Safety Devices for D. Current Edition of American Society of Mechanical Engineers ASME CSD-1, “Controls and Safety Devices for
Automatically Fired Boilers,” for assembly and operations of controls and safety devices. Automatically Fired Boilers,” for assembly and operations of controls and safety devices.
E. All wiring on boilers installed in the USA shall be made in accordance with the National Electrical Code and/ E. All wiring on boilers installed in the USA shall be made in accordance with the National Electrical Code and/
or Local Regulations. or Local Regulations.
CANADIAN BOILERS CANADIAN BOILERS
A. Current Edition of Canadian Standards Association CSA B139, “Installation Code for Oil Burning A. Current Edition of Canadian Standards Association CSA B139, “Installation Code for Oil Burning
Equipment,” for recommended Installation Practices. Equipment,” for recommended Installation Practices.
B. The equipment shall be installed in accordance with the current Installation Code for Gas Burning Appliances B. The equipment shall be installed in accordance with the current Installation Code for Gas Burning Appliances
and Equipment, CSA B149, and applicable Provincial Regulations for the class; which should be carefully and Equipment, CSA B149, and applicable Provincial Regulations for the class; which should be carefully
followed in all cases. Authorities having jurisdiction should be consulted before installations are made.
followed in all cases. Authorities having jurisdiction should be consulted before installations are made.
C. All wiring on boilers installed in Canada shall be made in accordance with the Canadian Electrical Code and/ C. All wiring on boilers installed in Canada shall be made in accordance with the Canadian Electrical Code and/
or Local Regulations. or Local Regulations.
The following defined terms are used throughout this manual to bring attention to the presence of hazards of various risk
levels or to important information concerning the life of the product.
Hazard definitions
Indicates an imminently hazardous situation which,
if not avoided, will result in death, serious injury or
substantial property damage.
Indicates a potentially hazardous situation which, if
not avoided, could result in death, serious injury or
substantial property damage.
Indicates a potentially hazardous situation which, if
not avoided, may result in moderate or minor injury or
property damage.
Indicates special instructions on installation, operation,
or maintenance which are important but not related to
personal injury hazards.
Les termes suivants sont utilisés tout au long de ce manuel afin de souligner la présence de dangers dont le niveau de
risque varie ou de mettre en relief de l’information cruciale quant à la durée de vie du produit.
Indique une situation de danger imminent qui, si
elle n’est pas évitée, peut causer la mort, de graves
blessures ou d’importants dommages matériels. Indique une situation de danger potentiel qui, si elle
n’est pas évitée, cause la mort, de graves blessures
ou d’importants dommages matériels.
Indique une situation de danger potentiel qui, si elle
n’est pas évitée, peut causer des blessures mineures
ou de légers dommages matériels. Indique des directives particulières, importantes,
mais sans risque de blessure, lors de l’installation,
de l’utilisation ou de l’entretien.
Définitions des dangers