11
DIELESS CRIMPING INSTRUCTIONS:
1. Place tool around the connector so that
it rests in the nest side of the jaw.
2. Make the first crimp in the middle
of the splice next to the knurled area
.
4. Make the second crimp about 1/16”
after the first crimp.
3. Once the crimp is completed, rotate
the tool head 180 degrees.
Note: Only
the jaws need to be rotated. Rotating
the entire tool is not necessary.
5. Continue crimping, rotating the
tool between each crimp, until
the splice is completely crimped.
DO NOT CRIMP ON THE
TAPERED SECTIONS.
See crimp chart for correct
number of crimps for each side
of the splice.
