background image

1

GENERAL WARNING:

  Like any sport, bicycling involves risk of injury and damage. By choosing to ride 

a bicycle, you assume the responsibility for that risk, so you need to know — and to 

practice — the rules of safe and responsible riding and of proper use and maintenance. 

Proper use and maintenance of your bicycle  reduces risk of injury. 

  This Manual contains many “Warnings” and “Cautions” concerning the consequences 

of failure to maintain or inspect your bicycle and of failure to follow safe cycling practices. 

  •  The combination of the       safety alert symbol and the word WARNING indicates a 

potentially hazardous situation which, if not avoided, could result in serious injury or death.

  •  The combination of the       safety alert symbol and the word CAUTION indicates a 

potentially hazardous situation which, if not avoided, may result in minor or moderate 

injury, or is an alert against unsafe practices.

  •  The word CAUTION used without the safety alert symbol indicates a situation which, if 

not avoided, could result in serious damage to the bicycle or the voiding of your warranty. 

  Many of the Warnings and Cautions say “you may lose control and fall”. Because any 

fall can result in serious injury or even death, we do not always repeat the warning of 

possible injury or death. 

  Because it is impossible to anticipate every situation or condition which can occur 

while riding, this Manual makes no representation about the safe use of the bicycle 

under all conditions. There are risks associated with the use of any bicycle which cannot 

be predicted or avoided, and which are the sole responsibility of the rider.

Summary of Contents for Bicycle




























Reviews: