Burley Bicycle Owner'S Manual Download

Page: 22 / 27

Mountain Tandems

CONDITION 2

Bikes designed for riding Condition 1, plus smooth gravel roads

and improved trails with moderate grades where the tires do not

lose ground contact.

INTENDED The challenges of mountain biking are obvious. The

added challenges of tandem riding mean that you should limit off-

road tandem riding to easy-moderate terrain.

NOT INTENDED For very aggressive mountain bike riding. Mountain tandems

are most definitely NOT for Downhill, Freeriding, North Shore. Choose terrain

with the abilities of both the Tandem’s captain and stoker in mind.

MAXIMUM WEIGHT LIMIT

Rider (lb/kg)

Luggage (lb/kg)

Total (lb/kg)

500 / 227

75 / 34

575 / 261

Cyclo-cross

CONDITION 2

Bikes designed for riding Condition 1, plus smooth gravel roads

and improved trails with moderate grades where the tires do not

lose ground contact.

INTENDED For cyclo-cross riding, training and racing. Cyclo-

cross involves riding on a variety of terrain and surfaces including

dirt or mud surfaces. Cyclo-cross bikes also work well for all

weather rough road riding and commuting.

NOT INTENDED For off road or mountain bike use, or jumping. Cyclo-cross

riders and racers dismount before reaching an obstacle, carry their bike over

the obstacle and then remount. Cyclo-cross bikes are not intended for mountain

bike use. The relatively large road bike size wheels are faster than the smaller

mountain bike wheels, but not as strong.

MAXIMUM WEIGHT LIMIT

Rider (lb/kg)

Luggage (lb/kg)

Total (lb/kg)

300 / 136

30 / 13.6

330 / 150

Road Tandems

CONDITION 1

Bikes designed for riding on a paved surface where the tires do

not lose ground contact.

INTENDED Are designed to be ridden on paved roads only. They

are not designed for mountain biking or off-road use.

NOT INTENDED Road tandem should not be taken off-road or

used as a mountain tandem.

MAXIMUM WEIGHT LIMIT

Rider (lb/kg)

Luggage (lb/kg)

Total (lb/kg)

500 / 227

75 / 34

575 / 261

Summary of Contents for Bicycle




























Search results

Summary of Contents for Bicycle

Reviews:

Related manuals for Bicycle

Brands by name

Popular brands

Burley Bicycle, Owner'S Manual

Search results

Summary of Contents for Bicycle

Reviews:

Related manuals for Bicycle

Brands by name

Popular brands