background image

36

37

components that fit heavy duty intended use. While all that is true, there is no guarantee 

that extreme riding will not break a Freeride bike.

  The terrain and type of riding that Freeride bikes are designed for is inherently 

dangerous. Appropriate equipment, such as a Freeride bike, does not change this 

reality. In this kind of riding, bad judgment, bad luck, or riding beyond your capabilities 

can easily result in an accident, where you could be seriously injured, paralyzed or 

killed.

  NOT INTENDED To be an excuse to try anything. Read Section 2. F, p. 10.   

 

TRADE OFF Freeride bikes are more rugged than All-Mountain bikes, for riding more 

difficult terrain. Freeride bikes are heavier and harder to ride uphill than All-Mountain 

bikes. 

  MAXIMUM WEIGHT LIMIT

 

  Rider (lb/kg)

Luggage* (lb/kg)

Total (lb/kg)

  300 / 136

5 / 2.3

305/138

 

      * Seat Bag Only

Dirt Jump 

CONDITION 5

 Bikes designed for jumping, hucking, high speeds, or aggressive riding 

on rougher surfaces, or landing on flat surfaces. However, this type of 

riding is extremely hazardous and puts unpredictable forces on a bicycle 

which may overload the frame, fork, or parts. If you choose to ride in 

Condition 5 terrain, you should take appropriate safety precautions such 

as more frequent bike inspections and replacement of equipment. You 

should also wear comprehensive safety equipment such as a full-face helmet, pads, and 

body armor.

  INTENDED For man-made dirt jumps, ramps, skate parks other predictable obstacles 

and terrain where riders need and use skill and bike control, rather than suspension. 

Dirt Jumping bikes are used much like heavy duty BMX bikes. 

A Dirt Jumping bike does not give you skills to jump. Read Section 2. F, p. 10.

  NOT INTENDED For terrain, drop offs or landings where large amounts of suspension 

travel are needed to help absorb the shock of landing and help maintain control.  

  TRADE OFF  Dirt Jumping bikes are lighter and more nimble than Freeride bikes, but 

they have no rear suspension and the suspension travel in the front is much shorter. 

  MAXIMUM WEIGHT LIMIT

 

  Rider (lb/kg)

Luggage (lb/kg)

Total (lb/kg)

  300 / 136

0

300/136

 

All Mountain   

CONDITION 4

  Bikes designed for riding Conditions 1, 2, and 3, plus rough technical 

areas, moderately sized obstacles, and small jumps.

  INTENDED For trail and uphill riding. All-Mountain bicycles are: 

(1) more heavy duty than cross country bikes, but less heavy duty than 

Freeride bikes, (2) lighter and more nimble than Freeride bikes,  

(3) heavier and have more suspension travel than a cross country 

bike, allowing them to be ridden in more difficult terrain, over larger obstacles and 

moderate jumps, (4) intermediate in suspension travel and use components that fit 

the intermediate intended use, (5) cover a fairly wide range of intended use, and within 

this range are models that are more or less heavy duty. Talk to your retailer about your 

needs and these models. 

  NOT INTENDED For use in extreme forms of jumping/riding such as hardcore 

mountain, Freeriding, Downhill, North Shore, Dirt Jumping, Hucking etc. No large 

drop offs, jumps or launches (wooden structures, dirt embankments) requiring long 

suspension travel or heavy duty components; and no spending time in the air landing 

hard and hammering through obstacles.

  TRADE OFF All-Mountain bikes are more rugged than cross country bikes, for riding 

more difficult terrain. All-Mountain bikes are heavier and harder to ride uphill than 

cross country bikes. All-Mountain bikes are lighter, more nimble and easier to ride 

uphill than Freeride bikes. All-Mountain bikes are not as rugged as Freeride bikes and 

must not be used for more extreme riding and terrain. 

  MAXIMUM WEIGHT LIMIT

 

  Rider (lb/kg)

Luggage* (lb/kg)

Total (lb/kg)

  300 / 136

5 / 2.3

305/138

   * Seat Bag Only

Gravity, Freeride, and Downhill 

CONDITION 5

 Bikes designed for jumping, hucking, high speeds, or aggressive riding 

on rougher surfaces, or landing on flat surfaces. However, this type of 

riding is extremely hazardous and puts unpredictable forces on a bicycle 

which may overload the frame, fork, or parts. If you choose to ride in 

Condition 5 terrain, you should take appropriate safety precautions such 

as more frequent bike inspections and replacement of equipment. You 

should also wear comprehensive safety equipment such as a full-face helmet, pads, 

and body armor.

  INTENDED For riding that includes the most difficult terrain that only very skilled 

riders should attempt.  

  Gravity, Freeride, and Downhill are terms which describe hardcore mountain, north 

shore, slopestyle. This is “extreme” riding and the terms describing it are constantly 

evolving. 

  Gravity, Freeride, and Downhill bikes are: (1) heavier and have more suspension 

travel than All-Mountain bikes, allowing them to be ridden in more difficult terrain, 

over larger obstacles and larger jumps, (2) the longest in suspension travel and use 

Summary of Contents for Bicycle




























Reviews: