WA-1150 and WA-1650 Wavemeter Operating Manual
3 Remote Communications
3-18
(09042-M-00 Rev C) EXFO Burleigh Products Group Inc Inc.
:QUEStionable:ENABle?
Description
Queries the SCPI Questionable Enable register.
Query Response
An integer which is the sum of the bit values for all bits in the register that
are set.
Examples
:STAT:QUES:ENAB?
:QUEStionable:ENABle <integer>
Description
Used to set and clear bits in the SCPI Questionable Enable register. This
register contains bits that are used to mask one or more conditions indicated
in the Questionable register. Setting a bit causes that condition to be masked
so that, even if the condition is true, its associated bit will not get set in the
Questionable register. The Questionable Enable register has the same format
as the Questionable register (see table above).
Examples
:STAT:QUES:ENAB 1
:STAT:QUES:ENAB 1024
:QUEStionable:HARDware:CONDition?
Description
Queries the SCPI Questionable Hardware Condition register which contains
bits that indicate that one or more hardware problems exist. These problems
may contribute to invalid or erred measurements. The bits in the register are
described in the table below.
Query Response
An integer which is the sum of the bit values for all bits in the register that
are set.
Examples
:STAT:QUES:HARD:COND?
Questionable Hardware Condition Register
Bit
Bit Value
Description
0
1
Reference laser has not stabilized (WA-1650
only).
1
2
Reference laser is over temperature (WA-1650
only).
2
4
No reference laser fringes detected during scan.
3
8
Lost reference laser fringes during scan.
4
16
Analog to digital converter error.
5
32
Failed to read the EEPROM.
6
64
Failed to read or write to the SRAM.
7
128
Scan assembly has stopped moving.
8
256
Input laser fringe strength is too low.
9
512
Not used.
10
1024
Not used.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
