Burkert Type MS01, Operating Instructions Manual

Page: 32 / 88

32
pH sensor - parameter
10.9 Restore some parameters to their factory values
You can restore the parameters in Table 3 to their factory values.
Table 3: List of parameters
Device Function tab Parameter
pH sensor MS01 pH sensor Parameter
Reference impedance
Filter response time
hold mode
hold Action
hold pH
hold Temperature
→
Make sure that the login user level is Installer . Refer to chpt. 9.4.
→ Go to device
pH sensor MS01
function
pH sensor
tab
Parameter
.
→ Select Restore factory values .
→
Select Parameter . Confirm with Finish .
The parameters in Table 3 are set to their default values.
10.10 Deactivate the monitoring of all the parameters, set
the threshold values to their factory values
→
Make sure that the login user level is Installer . Refer to chpt. 9.4.
→ Go to device pH sensor MS01 function
pH sensor
tab
Parameter
.
→ Select Restore factory values .
→
Select Messages triggers . Confirm with Finish .
The monitoring of all the parameters is deactivated and the threshold values are set to their factory
values.
English
Type MS01