22
Start-up
ATTENTION!
Breakage of the pneumatic connection pieces due to rota-
tional impact.
▶
When unscrewing and screwing in the transparent cap, do not
hold the actuator of the process valve but the basic housing.
Damage or malfunction due to penetration of dirt and
humidity.
▶
To observe degree of protection IP65 / IP67, screw the trans
-
parent cap in all the way.
→
Close the device (assembly tool: 674077
10)
).
10.3 Setting with Bürkert Communicator
The Bürkert Communicator can be used to make all settings on
the device.
The settings in the Bürkert Communicator can be found in
the operating manual.
10)
Theassemblytool(674077)isavailablefromyourBürkertsalesoffice.
10.3.1 Connecting IO-Link device with Bürkert
Communicator
Required components:
•
Communications software: Bürkert Communicator for PC
•
USB-büS interface set (see accessories)
•
büS adapter for büS service interface (see accessories)
•
If necessary, a büS cable extension (see accessories)
ATTENTION
Breakage of the pneumatic connection pieces due to rota-
tional impact.
▶
When opening or closing the device, do not press against the
actuator, but against the basic housing.
→
Screw off the transparent cap by turning counterclockwise.
Body casing
Transparent cap
Basic housing
Actuator
Fig. 18: Open positioner
english
Type 8694 REV.2
Summary of Contents for TopControl Basic 8694 REV.2
Page 33: ......
Page 34: ...www burkert com ...
