26
Control and display elements
11.5.2
Functions of the buttons
1 2 3 4
ON DIP
Communications
interface
LED 1
LED 2
DIP Switches
Button 1
Button 2
Fig. 22: Buttons
The configuration of the 2 buttons on the board varies depending
on the operating state (AUTOMATIC / MANUAL).
MANUAL operating state (DIP switch 4 set to ON):
Button
Function
1
Aerate (manually open / close the actuator)
13)
2
Deaerate (manually open / close the actuator)
13)
1 and 2
simulta-
neously
Longer than 10 s (< 30 s, LED 2 flashes at 5 Hz):
Device restart
Longer than 30 s (LED 2 flashes at 10 Hz):
Reset device to factory setting
Tab. 14:
ConfigurationofthebuttonsforMANUALoperatingstate
AUTOMATIC operating state (DIP switch 4 set to OFF):
Button
Function
1
Press for 5 s to start the
X.TUNE
function
2
-
1 and 2
simulta-
neously
Longer than 10 s (< 30 s, LED 2 flashes at 5 Hz):
Device restart
Longer than 30 s (LED 2 flashes at 10 Hz):
Reset device to factory setting
Tab. 15:
ConfigurationofthebuttonsforAUTOMATICoperatingstate
12) Depending on the operating principle of the actuator.
english
Type 8694 REV.2
Summary of Contents for TopControl Basic 8694 REV.2
Page 33: ......
Page 34: ...www burkert com ...
