manualshive.com logo in svg

Burkert 8791 REV.2, Operating Instructions Manual, Page: 32 / 81

Share
Download
Burkert 8791 REV.2 Operating Instructions Manual Download Page 32

32

Operation

9.3.3 

LED display

LED 1

LED 2

Fig. 12: 

LED display

LED 1
(RGB)

Display of device status and valve position

LED 2
(green)

Bus status display
Feedback when pressing the keys to start functions 

 

•

X.TUNE

 

•

device restart

 

•

Factory reset

9.3.4 

Status indicator

LED 1 (RGB) shows the device status.

The user can set the following LED operation mode to display the device status and valve position:

 

•

NAMUR operation mode

 

•

Valve mode

 

•

Valve mode and warnings (factory setting)

 

•

Fixed colour

 

•

LED off

The LED operation mode and valve position colours can be set using the Bürkert Communicator.

IO-Link:

 

The LED operation mode and valve position colours can also be set using an acyclic IO-Link parameter (see 

parameter list).

You can find the description for setting the LED operation mode in the operating instructions in 

Chapter “10.2.10 Setting LED operation mode, device status”

.

Type 8791, REV.2

english

Summary of Contents for 8791 REV.2


















































































Reviews:

No comments