manualshive.com logo in svg

Burkert 8791 REV.2, Operating Instructions Manual, Page: 23 / 81

Share
Download
Burkert 8791 REV.2 Operating Instructions Manual Download Page 23

23

Technical data

8 

TECHNICAL DATA

8.1 

Standards and directives

The device complies with the relevant EU harmonisation legislation. In addition, the device also complies 

with the requirements of the laws of the United Kingdom.
The harmonised standards that have been applied for the conformity assessment procedure are listed in the 

current version of the EU Declaration of Conformity/UK Declaration of Conformity.

8.2 

Operating conditions

WARNING!

Sunlight or temperature fluctuations may cause malfunctions or leaks.

 

▶

When using the device outdoors, protect it from adverse weather conditions.

 

▶

Ensure that ambient temperature does not exceed or drop below the permitted ambient temperature.

Ambient temperature

See type label

Degree of protection 

 IP65/IP67

7)

 to EN 60529   

(only when cables or plugs and sockets connected correctly)

7) 

 When using the positioner under IP67 conditions, the exhaust filter (see 

“Fig. 1: 

Structure, positioner Type 8791”) must be removed and the exhaust air led to the 

dry area.

Altitude

up to 2,000 m above sea level

8.3 

Mechanical data

Dimensions           See data sheet

Materials

   Body material        Aluminium, plastic-coated 

Other external parts     Stainless steel (V4A), PC, PE, POM, PTFE

  Seal material          EPDM, NBR, FKM

Weight              approx. 1.0 kg

Type 8791, REV.2

english

Summary of Contents for 8791 REV.2


















































































Reviews:

No comments