30
Installation
Optionally the earthing screw can be connected to Pos. A of the power supply card.
→
To do this, loosen earthing screw and attach eyelet of the earthing cable with the earthing screw (see
→
supply card for 25 - 1 000 Nm drives (except 300 Nm)
Fig. 21:Power supply card for 300 Nm drives
multivolt or 24 V aC/DC standard version
10.2.2.
The power supply voltage of the drive is 24 V AC/DC or 100 - 240 V AC (120 - 350 V DC).
Always observe the specifications on the rating plate!
A
B
C
H
G
D
E
F
H
A
B
C
D E
G F
Fig. 20: Power supply card for 25 - 1 000 Nm drives
(except 300 Nm)
Fig. 21: Power supply card for 300 Nm drives
no.
Designation
no.
Designation
a
Screw for earthing
E
LED 2: Error message
b
Connections for control and power supply
f
LED 3: Power on
C
Fuse
g
Connection for heating resistor
D
LED 1: Microprocessor OK
h
Connection 24 V DC
the rotary actuator can be connected and operated in two different modes:
Three points mode
1.
Open / Closed mode
2.
english
Type 3005
Summary of Contents for 3005
Page 135: ......
Page 136: ...www burkert com ...
