Burkert 3005, Operating Instructions Manual

Page: 11 / 136

11
System Description
6. sysTEm DEsCripTion
Designated application area 6.1.
The electromotive rotary actuator Type 3005 (designated below as rotary drive) was developed to control ball valves
or flap valves with a quarter turn. Optionally the drive is also available at a rotation angle of 180° and 270°.
general Description 6.2.
On account of its modular design the basic device can be expanded with many options.
Options for expanding the basic device can be found in chapter 6.4.Options .
The rotary actuator is a compact and powerful actuator system which ensures a long service life. The rotary actuator
is designed for direct or alternating current at varying power and for torques from 25 to 1 000 Nm (drive with ana-
logue signal 25 - 300 Nm).
The utilised materials guarantee maintenance-free operation and ensure a low thermal load. All standard version rotary
actuator feature manual emergency actuation and two additional limit switches and are tested by the manufacturer.
The limit switches have been set to 0 - 90° swivel operation.
The electromotive rotary actuator is available as an On/Off or variable speed drive. It can be combined with the
following components:
Stainless steel ball valve with two-part housing (Type 2651) •
Stainless steel ball valve with three-part housing (Type 2654) •
Plastic ball valve (Type 2657) •
Metal flap valve (Type 2671) •
Plastic flap valve (Type 2674) •
The drive direction cannot be reversed in the same operating process. The rotary actuator does not reverse
automatically
.
Mechanical operation, without switching over the motor, is also possible via the handwheel on the rotary actuator.
In electrical mode the handwheel is not rotated with the drive.
english
Type 3005