88
STATUS ACTIONS
A change in any status channel can be used to start or stop a macro. From the
AutoLoad Plus Status Actions tab, hover over On Action or Off Action of the
appropriate channel and press the […] button to open the Action dialog. Select
Run Macro or Stop Macro and select the desired macro in the Action target field.
FROM A MACRO
A macro that is running can include an instruction to start or stop
another macro. This is useful for chaining complicated sequences
and for reusing common sequences in different scenarios.
MACRO SCHEDULE
The following start/stop methods can be set from the Macro
Schedule dialog box. On the macro editor, click on the cell next to
Schedule
in the lower right hand corner, then click on the […]
button. This will bring up the dialog box.
