87
STARTING AND STOPPING MACROS
AUTOPILOT
If you are using AutoPilot, you can always start and stop macros from the Macros
list which is available from the menu bar as View>Macros or as keyboard shortcut
<F6>. See AutoPilot documentation for more details.
To start or stop a macro, select the desired macro and press the Run or Stop
buttons above the macro list. The current status of each macro will show to the left of the macro name.
WEB PAGE
From the web page of the ARC Plus SL, select the
Macros
tab. All macros are
available here and can be started and stopped by pressing the Run or Stop
buttons.
RAISE AND LOWER BUTTONS
Using AutoLoad, raise and/or lower buttons on any channel can be
assigned to a macro start or stop command. On the AutoPilot
commands tab, hover over the source cell for the desired channel
and
click on the […] button to bring up the source dialog. For either
button, select
Start Macro
or St
op Macro
from the dropdown then
select the macro you wish to start or stop. Often, you will use a start
macro for both raise and lower as shown here.
