PlusConnect
™ GatesAir
Sigma Installation and Operation Manual
11
the default set of channels to the ARC Plus during setup. If you have modified the default channel
mapping, the Custom View template may not function as intended.
To create a custom view with a PlusConnect template:
1.
Start AutoPilot and select the site and the ARC Plus unit you are using. If the site has not been
created in AutoPilot, see “Adding Sites” in the AutoPilot Instruction Manual, available at
2.
Select
File>Connect
. A progress dialog will be displayed while the connection to the ARC Plus
is being established.
3.
Open the Custom View Editor by selecting
File>New>Custom View
.
4.
When the Custom View Editor opens, select
File>New From Template.
This opens the Load
Template dialog.