Juice Box Stage 3 Professional (Pin out) Installation Guide – 5/13/09
JB3 Pin Out Installation Guide
© 2009 Copyright Burger Motor Sports, LLC
7 / 9
Map 8: --Race map --97 octane RM2 or greater required. The higher the octane, the more
power. --Modifications like intake, downpipes, and intercooler strongly suggested --Lagfix
enabled --May trigger tuner detection codes
Map 9: --More aggressive race map --100 octane RM2 or greater required. The higher the
octane, the more power. --Intake, downpipes, and intercooler required --Lagfix enabled --
May trigger tuner detection codes
Map 10-14 (A-D): --For use with modified JB3 boards only
Map 15 (F): --For use with tuning gauge only
Tuning gauge parameters for those of you with the BMS tuning gauge. Remember these
settings only take effect when you are on map 15(F).
LB
: Base boost level. Note: Map 6 is set to 11.
HP
: Additional boost above 4500rpm. Added on top of LB. Note: Map 7 is set to 5.
AF
: Air/fuel ratio. 0=stock levels, F=max rich. Note: Maps 6+ are set to F, 1-5 are set to 1.
PD
: Pedal Input / Boost Gain. Higher = faster boost build up, more chance for overshoot.
Note: All maps set to 6.
SD
: Solenoid pre-spool (lagfix). Higher = more pre-spool, more chance for overshoot. Note:
Map 7 is set to 6, map 6 set to 0.
AD
: Air intake temperature boost decay. Higher = more decay. Note: Map 7 is set to 8. Race
maps set to 0.
Summary of Contents for 135
Page 1: ......
