Burg Wächter BWNVR-2411P Operating Instructions Manual Download Page 143 | Manualshive

Page: 143 / 143

Burg Wächter BWNVR-2411P Operating Instructions Manual Download Page 143

Operating Instructions
BWNVR-2411P, SNVR-3842e, SNVR-31642e, BWNVR-31632Pi, SNVR-36444e

Notes on the disposal of the appliance

Please observe the applicable legal regulations in the case of disposal of unusable
equipment.

This symbol means that electrical and electronic equipment must be disposed of
separately from household waste at the end of its useful life. Please dispose of the
appliance at your local municipal collection point.

Imprint

The copyright of these operating instructions is held exclusively by BURG-GUARD GMBH.
Any reproduction, including on electronic data carriers, requires the written consent of BURG-GUARD
GMBH. Reprinting - even of extracts - is prohibited.

Errors and technical modifications excepted.

BURG-GUARD is a registered trademark of BURG-GUARD GMBH. Other company and product
names that may be mentioned are trademarks or registered trademarks or brands of the respective
owners.

© Copyright:
BURG-GUARD GMBH
Wormgermühle
58540 Meinerzhagen
Germany
www.burg-guard.com

__________________________________________________________________________

www.burg-guard.com

Your specialist dealer:

«
...
141
142
143

Summary of Contents for BWNVR-2411P
















































































































































Reviews:

No comments