BURG-WACHTER Door eGuard 8200, Manual

Page: 19 / 64

Door eGuard English | 23 22 | English Door eGuard
2. Attaching the monitor holder.
Release the monitor holding plate from the rear of
the monitor by unscrewing the screw on the bottom
of the monitor using a screwdriver. Peel off the 3M
protective film from the rear of the holding plate
and guide the camera cable through the hole in the
middle. Make sure that the arrow on the holding
plate points upwards before fixing the holding plate
with the 3M adhesive strip to the inside of the door.
Pull the camera cable through the fixing sleeve and
screw this tight using the enclosed assembly tool.
3. SD card
Insert a micro SD card into the card slot in order to
be able to save more than 25 images and export
data. To open the SD slot, push the sheet metal
holder towards the bottom of the device. Now the
slot can be folded open. Insert the micro SD card
so that the contacts of the slot and the SD card are