BURG-WACHTER Door eGuard 8200, Manual

Page: 18 / 64

22 | English Door eGuard
Dear customer,
thank you very much for deciding for Door eGuard
manufactured by BURG­WÄCHTER. Door eGuard is
a battery­operated system with a camera and colour
monitor, easy to install and providing its user with the
certainty of being able to see anything happening
outside the entrance door without being seen. Thanks
to its large adjustment range, this door spyhole can
be used with any common door with a thickness
from 38 to 110 mm. The camera optics can cover
existing holes in the door of 14 – 26 mm. Thanks to
the camera optics with a large viewing angle, even
persons hidden near the door can be identified.
Important: Please read the entire User
Manual before you start to mount the device.
Let us wish you a high level of security and
quality of living with your electronic spyhole.
Your BURG­WÄCHTER KG
Installation instructions
1. Fixing the camera on the outside of the door.
Replace the existing door position or drill a
14 mm hole at the desired position. Peel off the
3M protective film and then guide the camera into
the hole from the outside. Take care that the cable
is guided through the door without kinks. Make
sure that the bell push button is located under the
camera and align the camera vertical to the floor
before fixing the camera to the door.