Burford 8830, Service Manual, Page: 20 / 63

5-7
5.4 Changing Machine Setpoints, cont’d.
5.4.7 Tank Level Sensor Calibration
1. From the “MAIN MENU” screen, touch “TANK
LEVEL SENSOR CALIBRATION”.
2. The following pop-up screen will appear.
3. This setting is used to fine-tune the sensitivity
of the level sensor. Contact Burford
Corporation for additional information. Once
the desired adjustments have been entered
touch the “CLOSE” box to return to the
previous screen.
5.4.8 Goto Display Configuration Screen
These settings are preset at the factory. Contact Burford Corporation for
additional information.
5.4.9 Encoder Setup
1. From the “MAIN MENU” screen, touch
“ENCODER SETUP”.
2. The following pop-up screen will appear.
3. This setting is used during initial machine
installation or encoder replacement. Contact
Burford Corporation for additional
information. Once the desired adjustments
have been entered touch the “CLOSE” box to
return to the previous screen.