Page 28
TROUBLESHOOTING (cont.)
Screen Displayed
Possible Cause
Troubleshooting Procedures
NO FUNNEL
PRESENT
TEMPERATURE
TOO LOW
1.
SMART FUNNEL
not fully inserted
into the funnel rails.
2. Not using a
SMART FUNNEL
,
and the
FUNNEL DETECT
function
is activated (on).
1. Water temperature in the tank
does not meet the
SET READY
TEMPERATURE.
1. Brew funnel was not removed
after the previous brew cycle was
fi nished.
1. Brew funnel was moved out of
position after the brew cycle was
started.
Position the funnel so that the sensor
is directly beneath the sensor coil on
the brewer.
Disable the
FUNNEL DETECT
func-
tion. See page 23 for procedure.
(a) Wait for the brewer to heat to the
proper temperature.
(b) Disable the
BREW LOCKOUT
function. See page 11 for proce-
dure.
Remove funnel, check contents, and
insert back into the funnel rails.
OR
Press
BREW
to start a brew cycle
without removing the funnel.
To resume brewing, correctly posi-
tion the funnel and press
BREW
again. The brew cycle will resume
from the point it was interrupted.
OR
Press
ON/OFF
to terminate the
cycle.
CHECK FUNNEL
FOR FRESH COFFEE
PRESS BREW
TO BREW ANYWAY
TO CANCEL
PRESS ON/OFF
TO FINISH:
PRESS BREW
BREW STOPPED!
FUNNEL REMOVED?
34025.1 082404