Page 18
ENABLE ADS?
This function allows the operator to choose whether
or not to display the advertising message that was en-
tered into the brewer with an
AD CARD
. This message
will be displayed when the brewer is not in use.
ENABLE ADS?
NO DONE YES
Procedure to Enable/Disable Ads
:
1. Press and hold upper right hidden switch until the
display reads
SET NEW RECIPES
. Release switch.
Press and release upper right hidden switch until
the display reads
ENABLE ADS
. The
YES
or
NO
will be fl ashing to indicate the current selection.
2. Press and release the
NO
pad to disable this func-
tion (no ads will be displayed on the screen), or;
3. Press and release the
YES
pad to enable this func-
tion (ads will be displayed on screen).
4. When fi nished, press and release
DONE
to save
the new setting, exit the
ENABLE ADS
function and
advance to the next function screen,
SET TEMP.
Another alternative is to press and release the
pad located on the front switch panel to exit
the
ENABLE ADS
function and return to the
MAIN
SCREEN.
SET TEMP - Range: 185˚F (85˚C) to 205˚F (96˚C)
This function allows the operator to set the brew
water temperature in the tank. It also sets the hot
water faucet dispense temperature.
P2301
PROGRAMMING FUNCTIONS - (cont.)
P2302
Procedure to set brew temperature:
1. Press and hold upper right hidden switch until the
display reads
SET NEW RECIPES
. Release switch.
Press and release upper right hidden switch until
the display reads
SET TEMP
.
P2303
2. To adjust the brew temperature, press
(-)
to de-
crease or
(+)
to increase the brew temperature.
3. When fi nished, press and release
DONE
to save
the new setting, exit the
SET TEMP
function and
advance to the next function screen,
SET READY.
Another alternative is to press and release the
pad located on the front switch panel to exit the
SET
TEMP
function and return to the
MAIN SCREEN.
SET READY - Range: 185˚F (85˚C) to 203F (95C)
This function allows the operator to set the mini-
SET TEMP: XXX°
(-) DONE (+)
SET READY: XXX°
(-) DONE (+)
mum temperature allowable to start a brew cycle. The
range can be from 185˚F (85˚C) to within 2˚F of the
SET
TEMP.
The water must be at the
SET READY
tempera-
ture or higher for the display to indicate
READY TO
BREW
. If brew lockout is enabled, the brewing process
will not start below this
READY
temperature.
NOTE:
The upper limit is the water temperature control
setting minus 2˚F (-17°C).
o
o
o
o
34025.1 011006