Page 22
BREW COUNTERS
This function allows the operator to track the
number of brew cycles completed. There are three
resettable counters, and one life counter that is not
resettable.
EXIT TO
NEXT FUNCTION
SCREEN
XXXX
NEXT RESET
XXXX
NEXT
BREW COUNTERS?
NO YES
Procedures to view/reset the brew counters
:
1. Press and hold upper right hidden switch until the
display reads
SET NEW RECIPES
. Release switch.
Press and release upper right hidden switch until
the display reads
BREW COUNTERS
.
2. Pressing
NO
in this screen will advance to the next
function. Press
YES
to view the fi rst brew counter.
This number represents the brew cycles initiated
since that counter was last reset.
3. To reset the resettable counter to zero press
and release
RESET
when viewing that particular
counter's screen.
4. To advance to the other counters, press and release
NEXT.
This will advance to
total brews (non-reset-
table).
5. When fi nished, press
NEXT
until the display reads
BREW COUNTERS.
Press and release
NO
to ad-
vance to the next function screen, or press and
release the
pad on the front switch panel to
exit the
BREW COUNTERS
function and return to
the
MAIN SCREEN.
P2448
FUNNEL DETECT?
NO DONE YES
Procedure to set funnel detect:
1. Press and hold upper right hidden switch until the
display reads
SET NEW RECIPES
. Release switch.
Press and release upper right hidden switch until
the display reads
FUNNEL DETECT
.
2.
NO
or
YES
should be fl ashing to indicate the cur-
rent setting.
4. Select
YES
to prevent brewing if a Smart Funnel is
not correctly situated in the rails. If this function
is activated and a brew cycle is attempted with the
funnel not properly situated, the display will read,
FUNNEL NOT IN PLACE
, until one is in place.
5. Select
NO
to allow brewing without a Smart Fun-
nel in place. This is selected when brewing with a
funnel other than a Smart Funnel
(a regular brew
funnel).
6. When fi nished, press and release
DONE
. This will
retain the changes, exit this function screen and
advance to the next. Another alternative is to press
the
pad located on the front switch panel to
exit the
FUNNEL DETECT
and return to the
MAIN
SCREEN.
P2309
PROGRAMMING FUNCTIONS - (cont.)
FUNNEL DETECT (optional)
This function allows the operator to prevent the
start of a brew cycle if a Smart Funnel is not positioned
correctly in the funnel rails.
34025.1 011006