Page 23
SERVICE TOOLS
This function allows the testing of individual com-
ponents and the ability to check switches for proper
function. This function also tests the Soft Heat server's
status on the brewer (in place or removed), and the
funnel sensor coil's frequency (diagnostic tool for
troubleshooting purposes only).
EXIT TO
NEXT FUNCTION
SCREEN
EXIT TO
NEXT FUNCTION
SCREEN
PRESS AND RELEASE
® SYMBOL
PRESS AND RELEASE
® SYMBOL
PRESS AND RELEASE
® SYMBOL
NEXT COMPONENT
TO BE TESTED
TEST OUTPUTS?
NO YES
TEST SWITCHES?
NO YES
BREW VALVE
ON NEXT OFF
SERVER REMOVED
IN PLACE
125.0 KHZ. 4
4 125.0 KHZ.
NOTHING PRESSED
TEST FREQUENCY?
NO YES
TEST SERVERS?
NO YES
SERVICE TOOLS?
NO YES
P2449
Procedures to set server detect:
1. Press and hold upper right hidden switch until the
display reads
SET NEW RECIPES
. Release switch.
Press and release upper right hidden switch until
the display reads
SERVER DETECT
.
2. The
NO
or
YES
fl ashes to indicate the current
selection.
3. Select
YES
to prevent brewing if the Soft Heat
server is not correctly positioned on the brewer
beneath the funnel.
NOTE:
If
YES
is selected and a brew cycle is attempted
with a server not properly placed, the display will read
SERVER NOT IN PLACE
.
4. Select
NO
to allow brewing without a Soft Heat
server in place. This is selected when brewing into
a container other than a Soft Heat
Server.
5. When fi nished, press and release
DONE
. This will
save the new setting, exit the function screen and
advance to
SERVICE TOOLS
. Another alternative
is to press the
pad located on the front switch
panel to exit the
SERVER DETECT
function and
return to the
MAIN SCREEN.
SERVER DETECT
This function allows the operator to prevent the start
of a brew cycle if a Soft Heat server is not positioned
correctly on the brewer.
PROGRAMMING FUNCTIONS - (cont.)
SERVER DETECT ?
NO DONE YES
34025.1 011006
P2310
UPPER RIGHT
HIDDEN SWITCH
UPPER RIGHT
HIDDEN SWITCH
UPPER
RIGHT HIDDEN SWITCH