Bunn Single SH Installation And Operating Manual Download Page 25

Page: 25 / 48

Page 25

DRIP TIME (now displayed on "non" funnel lock units
as well)

This function allows the setting or modification of

the funnel locks to stay engaged after the end of a
brew cycle. This ensures that the funnel cannot be
removed until after the liquid has emptied out of the
funnel.

Procedure to modify drip times:
Range:

OFF to 10 minutes for all three batch sizes.

NOTE:

If the brewer is already in the

DRIP TIMES

screen, it is not necessary to follow steps 1 through 10
in this section, but proceed directly to step 11.

1. Press and hold the ® pad until the display reads

SET NEW RECIPES.

Release the ® pad. Press the

® until the display reads

REVIEW RECIPES

2. Press

YES

to proceed. The display should now

read

NO-NAME LEFT,

along with

MODIFY, SHOW

and

NEXT.

3. Press and release

NEXT

to advance to the desired

coffee name to be modified.

4. Press and release

MODIFY.

The display should

read

BREW OZ.

5. Press and release

DONE

. The display should read

3 BATCHES DONE?

6. Press and release

YES

. The display should now

read

% BYPASS.

7. Press and release

DONE

. The display should read

3 BATCHES DONE?

8. Press and release

YES.

The display should now

read

SET PULSE BREW.

9. Press and release

NO.

The display should now

read

SET PREINFUSION.

10. Press and release

NO.

The display should now

read

DRIP TIME,

along with either the word

OFF

or a time will be showing. A batch light should also
be blinking.

11.

Using the

(-)

and

(+)

, set the amount of time from

when the brew solenoid shuts off to when drip-out
occurs for that batch size.

NOTE:

Set to

OFF

to prevent funnel locks from engag-

ing (to disable this function), for a particular batch
size. To set to

OFF,

press and release

(-)

until

OFF

displayed.

P2297

29877 080301

PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)

12. When finished, press another batch size and re-

peat step 11 until all three sizes are set.

13. When finished, press

DONE

. The display should

read

3 BATCHES DONE

14. If the three batch sizes are set correctly, press

YES

The screen should show the name of the coffee
flavor being programmed (modified) along with

SETUP COMPLETE

15. After a 5 second delay, the display will advance to

the next coffee name in the brewer's memory. If no
other coffee names are present, the display will
read

THAT WAS THE LAST RECIPE

, and return to

the

REVIEW RECIPES

screen.

Summary of Contents for Single SH

















































Search results

Summary of Contents for Single SH

Reviews:

Related manuals for Single SH

Brands by name

Popular brands

Bunn Single SH, Installation And Operating Manual

Search results

Summary of Contents for Single SH

Reviews:

Related manuals for Single SH

Brands by name

Popular brands